We engineer our high-performance coatings to deliver function and aesthetics. The functional aspect delivers solutions for corrosion prevention and passive fire protection. The efficiencies in coatings performance are evident through the reduction in the number of coats required, increased edge retention, and improved dry times so you can get the most out of our solutions while controlling costs. These offerings include systems that eliminate entire application steps, as well as high-solids coatings featuring extremely short re-coat times. The aesthetics aspect leaves our customers spoilt for choice with a wide variety of topcoats with varying degrees of performance, durability, colour and gloss.
A two-component, high-build, direct-to-metal polyaspartic coating.
Ideal for maintenance or new construction applications, Envirolastic 940 DTM can be applied in a single coat. This fast-drying formula reduces dirt pickup, improves productivity, and can be applied at temperatures as low as 2°C.
A two-component, high-build, direct-to-metal polyaspartic coating.
Ideal for maintenance or new construction applications, Envirolastic 940 LV can be applied in a single coat. Its fast-drying, low VOC (less than 250 g/l) formula reduces dirt pickup, improves productivity, and can be applied at temperatures as low as 5°C.
A single-pack thin film intumescent coating.
A highly versatile single-pack, solvent based, acrylic intumescent coating designed for internal and external use, for fire protection requirements from 15 to 120 minutes. Ideal for off-site workshop application but also suitable for on site application. Tested and assessed in accordance with AS4100-1998 (R2016). FIRETEX FX2005 offers excellent application characteristics, providing a quick and trouble-free application experience and a high level of finish quality due to its smooth paint-like surface.
A single-component, water-based, thin-film, intumescent fire protection coating.
Sherwin-Williams' latest generation water based acrylic intumescent technology provides highly competitive solutions for the fire protection of structural steelwork for periods of 15 to 120 minutes. Designed for application to already erected structural steelwork, FIRETEX FX5090 is suitable for use in internal environments and provides a high level of decorative finish when top coated with Acrolon series topcoats. The product has been tested and assessed in accordance with AS4100-1998 (R2016).
Next-generation ultra fast-drying and durable intumescent coating.
This next generation intumescent technology is chemically cured to dry and can be handled in as little as one hour (at 23°C), Maximising workshop throughput with the most efficient intumescent coating on the market today that provides fire protection up to 120 minutes with industry-best, low-film thicknesses.
FIRETEX FX6002 provides a very smooth “off the gun” finish and can be top coated with Acrolon series topcoats, providing a high level of finish quality not seen before with intumescent coatings. Suitable for internal decorative, non-decorative and external decorative exposure up to a C5 (ISO 12944-2) environment. FIRETEX FX6002 has been tested and assessed in accordance with AS4100-1998 (R2016).
A two-component, isocyanate-free polysiloxane finish.
Sher-Loxane 800 is a versatile, high-performance, epoxy siloxane hybrid that combines the properties of both a high-performance epoxy and polyurethane. Sher-Loxane 800 is approved to APAS 2920/2.
A three-component, organic, polyamide epoxy, zinc-rich coating.
Intended for use over properly prepared steel, Zinc Clad 4100 contains 98.2% (by weight) zinc dust pigment in the dry film. Zinc Clad 4100 is approved to APAS 0014/2 and APAS 2916/1 and is also approved for slip grip (according to AS 4100).
A two-component, polyamide epoxy, zinc-rich coating.
Zinc Clad IV contains 85% (by weight) zinc dust pigment in the dry film. Zinc Clad IV is approved to APAS 0014/2 and APAS 2916/1, and is also approved for slip grip (according to AS 4100).
